Camshaft Position Sensor
NOTE:
On ES300 and RX300, Camshaft Position (CMP) sensor is also referred to as a Variable Valve Timing (VVT) sensor. See VARIABLE VALVE TIMING SENSOR (ES300, GS430, LS430 & RX300) .
Camshaft sensor contains a pick-up coil. On GS430, LS430 and LX470, signal plate has one tooth on its outer circumference, and is mounted on camshaft. On ES300, GS300, IS300 and RX300, signal plate has three teeth on its outer circumference, and is mounted on camshaft. On all models, as camshaft rotates, a protrusion on signal plate passes near pick-up coil. This induces AC voltage in pick-up coil. ECM senses this voltage signal and interprets it as camshaft position.
The ECM uses input signal for determining ignition timing (spark advance) and for controlling fuel injection system, idle speed control system, heated oxygen sensor system and intake air control valve system. See CAMSHAFT POSITION SENSOR LOCATION table.
CAMSHAFT POSITION SENSOR LOCATION
| Application | Location |
|---|---|
| ES300 & RX300 | At Rear Of Each Cylinder Head, Below Valve Cover |
| GS300 & IS300 | Left Rear Intake Side Of Cylinder Head |
| GS430, LS430 & LX470 | Mounted To Front Of Left Upper (No. 3) Timing Belt Cover |