Test No. 14: Headlight Relay Circuit
NOTE:
If LEXUS scan tool is available, start test from step 1. If this scan tool is not available, start test from step 2.
- Using scan tool, operate headlight relay in ACTIVE TEST. If headlight relay does not operate, go to next step. If headlight relay operates, go to step 3.
- Check headlight relay. See HEADLIGHT RELAY under COMPONENT TESTS. If headlight relay is okay, go to next step. Replace headlight relay as necessary. Retest system operation.
- Check circuits for faults between headlight relay, body control ECU No. 2 and battery. See WIRING DIAGRAMS . Repair or replace as necessary. If circuits are okay, perform appropriate pin voltage test under BODY CONTROL ECU PIN VOLTAGE TESTS under COMPONENT TESTS.