Test No. 3: Clock Circuit
NOTE:
If LEXUS scan tool is available, start test from step 1. If this scan tool is not available, start test from step 2.
- Using scan tool, check clock light dimming in ACTIVE TEST. If clock light does not dim, go to next step. If clock light dims, go to step 3.
- Check clock. See CLOCK under COMPONENT TESTS. Replace clock as necessary. Retest system operation. If clock is okay, go to next step.
- Check circuits for faults between clock, body control ECU No. 2 and battery. See WIRING DIAGRAMS . Repair or replace as necessary. If circuits are okay, perform appropriate pin voltage test under BODY CONTROL ECU PIN VOLTAGE TESTS under COMPONENT TESTS.