Test No. 5: Driver's Door Key Lock & Unlock Switch Circuit
NOTE:
If LEXUS scan tool is available, start test from step 1. If this scan tool is not available, start test from step 2.
- Using scan tool, check for DTC B1222. If DTC B1222 is retrieved, go to next step. If DTC B1222 is not retrieved, see MULTIPLEX CONTROL SYSTEMS - GS300 & GS430 article.
- Check driver's door key lock and unlock switch. See DOOR KEY LOCK & UNLOCK SWITCH under COMPONENT TESTS. Replace switch as necessary. Retest system operation. If switch is okay, go to next step.
- Check circuits for faults between driver's door key lock and unlock switch and driver's door ECU. See WIRING DIAGRAMS . Repair or replace as necessary. If circuits are okay, perform TEST NO. 26: PASSENGER'S DOOR KEY LOCK & UNLOCK SWITCH CIRCUIT .