Taillight Circuit
NOTE:
If LEXUS scan tool is available, start test from step 1. If this scan tool is not available, start test from step 2.
- Using scan tool, operate taillights in ACTIVE TEST. If taillights do not operate, go to next step. If taillights operate, go to next test listed in BODY NO. 2 CONTROL SYSTEM table under TROUBLE SHOOTING .
- Check taillight bulb. Replace bulb as necessary. If bulb is okay, check circuits for faults between taillights, body No. 4 ECU and battery. See WIRING DIAGRAMS . Repair or replace as necessary. If circuits are okay, go to next test listed in BODY NO. 2 CONTROL SYSTEM table under TROUBLE SHOOTING .