Power Mirror Switch Circuit
Disconnect driver's side junction block ECU harness connector. Disconnect mirror switch harness connector. Check for continuity between specified harness connector terminals. See MIRROR SWITCH CIRCUIT CONTINUITY table. If continuity is as specified, check mirror switch. See POWER MIRROR SWITCH under COMPONENT TESTS. If continuity is not as specified, repair open circuit(s).
MIRROR SWITCH CIRCUIT CONTINUITY
| Harness Connector/Terminal No. | Wire Color | Driver Side JB ECU Terminal No. |
|---|---|---|
| B/2 | GRN/ORG | 8 |
| B/6 | PNK | 19 |
| B/7 | GRY | 9 |
| A/7 | BRN/RD | 11 |
| A/8 | RD/GRN | 10 |
| A/9 | LT.GRN | 7 |