Power Mirror Switch
Remove power mirror switch. Check resistance or continuity between specified power mirror switch terminals (component side) with switch in specified position. See POWER MIRROR SWITCH RESISTANCE table. See Fig 1. If resistance or continuity is not as specified, replace power mirror switch.
POWER MIRROR SWITCH RESISTANCE
| Switch Position | Terminals No. | Resistance (Ohms) | |
|---|---|---|---|
| Left & Right Select Switch | |||
| Left | 8 & 9 | 100 | |
| Right | 8 & 9 | 0 | |
| Left & Right Switch | |||
| Up | 7 & 9 | About 100 | |
| Right | 7 & 9 | 250 | |
| Down | 7 & 9 | 470 | |
| Left | 7 & 9 | 800 | |