Brake Line
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Lexus GS 430, 2004 Lexus GS 300, 2003 Lexus GS 430, 2003 Lexus GS 300, and 2002 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
- Fill reservoir with brake fluid.
- Connect a vinyl tube to bleeder screw on brake caliper and place the other end in a clear jar.
- Depress brake pedal several times, then loosen bleeder screw with pedal held down.
- At the point when fluid stops coming out, tighten bleeder screw to specification. See TORQUE SPECIFICATIONS .
- Release brake pedal. Repeat 3 and 4 until all air in fluid has been bled out.
- Repeat procedure to bleed air out of the brake line for each wheel.