Input Shaft: Reassembly

WARNING: This page is about a different car, the 2004 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Coat all of the sliding and rotating surfaces with gear oil before reassembly.

INSTALL FRONT BALL BEARING
1. Using SST and a press, install a new front ball bearing.
  1. SST 09316-60011 (09316-00011)
  Fig 1: Installing New Front Ball Bearing Using SST & Press
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Select a snap ring that will allow the minimum axial play.
  
  Fig 2: Snap Ring Thickness Specification Table
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a snap ring expander, install a new snap ring.
  
  Fig 3: Installing New Snap Ring Using Snap Ring Expander
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BALL BEARING
1. Using SST and a press, install the rear ball bearing.
  1. SST 09316-60011 (09316-00011, 09316-00031)
  Fig 4: Installing Rear Ball Bearing Using SST & Press
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Select a snap ring that will allow the minimum axial play.
  
  Fig 5: Snap Ring Thickness Specification Table
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a snap ring expander, install a new snap ring.
  
  Fig 6: Installing New Snap Ring Using Snap Ring Expander
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002