Bench Testing: Rotor
- Check rotor for open field windings by using an ohmmeter across slip rings. Rotor resistance should be within specification. See ROTOR RESISTANCE SPECIFICATIONS table.
- Check rotor for shorts to ground by connecting ohmmeter between slip ring and rotor shaft. Ohmmeter should indicate no continuity. Check slip rings for wear or pitting. Standard slip ring diameter is .559-.567" (14.2-14.4 mm). Turn slip rings on lathe if necessary. Minimum slip ring diameter is .504" (12.8 mm).
ROTOR RESISTANCE SPECIFICATIONS
| Application |
Ohms |
| Avalon, Land Cruiser, LX 470, MR2, Sienna, Sequoia, Tacoma, Tundra & 4Runner |
2.1-2.5 |
| Camry & Camry Solara |
| 4-Cyl. |
2.7-3.1 |
| V6 |
2.1-2.5 |
| Highlander |
| 4-Cyl. |
2.3-2.7 |
| V6 |
2.1-2.5 |
| RAV4 |
| 90A |
2.1-2.5 |
| 100A |
2.7-3.1 |
| All Other Models |
2.7-3.1 |