With Driving Position Memory
WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Disconnect power mirror motor 10-pin electrical harness connector. Using jumper wires, connect positive battery voltage to power mirror terminal No. 1 and connect negative battery voltage to power mirror terminal No. 2. See Figure. Mirror should turn to the left. Reverse polarity of jumper wires and check that mirror turns to the right.
- Connect positive battery voltage to power mirror terminal No. 3 and connect negative battery voltage to power mirror terminal No. 2. See Figure. Mirror should turn upward. Reverse polarity of jumper wires and check that mirror turns downward. If power mirror does not operate as specified, replace power mirror assembly.