Park/Neutral Switch Continuity Check
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect electrical connector from park/neutral switch at transmission or transaxle. Using ohmmeter, check for continuity at specified terminals with gearshift lever in proper positions. See Fig 1 or Fig 2 . See PARK/NEUTRAL SWITCH SPECIFICATIONS table. If continuity is not as specified, replace switch.
PARK/NEUTRAL SWITCH SPECIFICATIONS
| Application & Gearshift Lever Position | Continuity Between Terminals No. | |
|---|---|---|
| Avalon, Camry, Camry Solara, Corolla & Sienna | ||
| Park | 5 & 6, 2 & 7 | |
| Reverse | 2 & 8 | |
| Neutral | 5 & 6, 2 & 9 | |
| Drive | 2 & 10 | |
| 2 | 2 & 3 | |
| Low | 2 & 4 | |
| Celica, Highlander, Land Cruiser, RAV4, Sequoia & 4Runner | ||
| Park | 6 & 9, 3 & 1 | |
| Reverse | 3 & 2 | |
| Neutral | 6 & 9, 3 & 5 | |
| Drive | 3 & 7 | |
| 2 | 3 & 4 | |
| Low | 3 & 8 | |
| ECHO | ||
| Park | 3 & 5, 6 & 9 | |
| Reverse | 3 & 4 | |
| Neutral | 1 & 3, 6 & 9 | |
| Drive | 3 & 8 | |
| 2 | 2 & 3 | |
| Low | 3 & 7 | |
| Tacoma | ||
| Park | 5 & 6, 4 & 7 | |
| Reverse | 4 & 8 | |
| Neutral | 5 & 6, 4 & 10 | |
| Drive | 4 & 9 | |
| 2 | 4 & 2 | |
| Low | 4 & 3 | |
| Tundra | ||
| Park | 4 & 7, 5 & 6 | |
| Reverse | 4 & 8 | |
| Neutral | 4 & 10, 5 & 6 | |
| Drive | 4 & 9 | |
| 2 | 4 & 2 | |
| Low | 4 & 3 | |