Spark Plug: Installation
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- To avoid cross threading, start the spark plug into the cylinder head by hand.
- Tighten spark plugs.
- Install ignition coil assembly onto spark plug.
- Hand tighten coil screws.
- Refer to SPECIFICATIONS for torque specification.
- Connect and lock the electrical connector.
- Front Plugs - Install the intake manifold, (Refer to INTAKE MANIFOLD )
- Connect the negative battery cable.