Compass Mini-Trip Computer: Installation
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Position the CMTC module in the overhead console and connect the electrical connector.
- Install the screws holding the CMTC module in the overhead console.
- Install the overhead console (Refer to INSTALLATION ).
- Connect the battery negative cable.
NOTE:
If the CMTC module is being replaced, the tire pressure monitoring system must be retrained. Refer to the TIRES/WHEELS & TIRE PRESSURE MONITORING SYSTEM
for detailed instructions.
NOTE:
If a new CMTC module has been installed, the compass will have to be calibrated and the variance set. Refer to COMPASS VARIATION ADJUSTMENT
and STANDARD PROCEDURE - COMPASS CALIBRATION
.