LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2003 >> ES 300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 427 (Power Liftgate System) >> Drive Unit >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Unit: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Disconnect and isolate the negative battery cable.
  3. Remove the link rod assembly from the liftgate attachment point. Refer to LINK ROD .
  4. Remove the left rear D-pillar trim panel from the vehicle. Refer to D-PILLAR TRIM .
  5. Disconnect the wire harness connector from the power liftgate drive unit assembly.
    CAUTION: Do not let the drive unit bolt retainers drop into the body cavity. Rattles and customer complaints could result.
  6. Remove the power drive unit retaining bolts.
  7. Unhook the drive unit assembly from the D-pillar and remove the unit from the vehicle.
scientia non olet · About LEMON Manuals