LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2003 >> ES 300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 427 (Power Liftgate System) >> Exterior Handle Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Exterior Handle Switch: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the handle switch in the light bar assembly.
  2. Install the liftgate handle. Refer to LIFTGATE .
  3. Connect the liftgate handle electrical connector.
  4. Install the liftgate trim panel. Refer to LIFTGATE .
  5. Connect the negative battery cable.
  6. Using an appropriate scan tool, check any erase any power liftgate control module diagnostic trouble codes.
  7. Verify power liftgate system and handle switch operation. Cycle the power liftgate through one complete open and close cycle, this will allow the power liftgate control module to relearn its cycle with the new components.
scientia non olet · About LEMON Manuals