Link Rod: Installation
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Install the drive unit end of the link rod on its mounting sphere by gently pushing straight on.
- Push the plastic retainer down to lock the mechanism in position.
- Install the D-pillar trim on the vehicle. Refer to D-PILLAR TRIM .
- Install the liftgate end of the link rod on its mounting sphere by gently pushing straight on.
- Push the plastic retainer down to lock the mechanism in position.
- Close the liftgate and check for proper power liftgate operation.