Remote Control Of All Windows (Except Driver's) Does Not Function With Master Switch (Windows Operate Normally With Each Of Master Switches)
REMOTE CONTROL OF ALL WINDOWS (EXCEPT DRIVER'S) DOES NOT FUNCTION WITH MASTER SWITCH TROUBLESHOOTING
| Trouble | Suspect Area (terminal No.) | Parts name |
|---|---|---|
| All windows (except driver's) do not operate by remote control. | Fail-safe mode caused by leaving the master switch ON or short circuit occurred in remote control control switch of master switch.
|
|
| Only passenger's door does not operate. (UP, DOWN and AUTO DOWN do not operate.) |
Driver door control ECU DT1 terminal does not output.
|
|
| Only passenger's door does not operate. (Each operation does not operate.) |
Master switch faulty
|
|
| Only rear right side door does not operate. (UP, DOWN and AUTO DOWN do not operate.) |
Driver door control ECU DT2 terminal does not output.
|
|
| Only rear right side door does not operate. (Either UP, DOWN or AUTO DOWN does not operate.) |
Master switch faulty
|
|
| Only rear left side door does not operate. (UP, DOWN and AUTO DOWN do not operate.) |
Driver door control ECU DT3 terminal does not output.
|
|
| Only rear left side door does not operate. (Either UP, DOWN or AUTO DOWN does not operate.) |
Master switch faulty
|
|
| Only UP operation does not operate. (All window (Except driver side) doors.) |
Master switch ON SC2 terminal does not output. Driver door control ECU SC2 terminal does not input.
|
|
| Only UP operation does not operate. (Only specific window does not operate.) |
Master switch faulty
|
|
| Only DOWN operation does not operate. (All window (Except driver side) doors.) |
Master switch ON SC1 terminal does not output. Driver door control ECU SC1 terminal does not input.
|
|
| Only DOWN operation does not operate. (Only specific window does not operate.) |
Master switch faulty
|
|
| Only AUTO DOWN operation does not operate. (All window (Except driver side) doors.) |
Master switch ON SC3 terminal does not output. Driver door control ECU SC3 terminal does not input.
|
|
| Only AUTO DOWN operation does not operate. (Only specific window does not operate.) |
Master switch faulty
|