Active Test
You are able to set the A/T gear position as you like by operating each solenoid valve forcibly using OBD II scan tool or LEXUS hand-held tester.
However, the condition that you can set the gear position differs depending on the setting gear position, so perform the ACTIVE TEST following conditions in the table below.
ACTIVE TEST CHART
| No. | Indication Gear Condition | Starting Condition | Canceling Condition |
|---|---|---|---|
| 1 | 1st, 2nd | Vehicle speed: 0 km/h (0 mph) | Vehicle speed: 0 km/h (0 mph) |
| 2 | 3rd | Vehicle speed: 0 km/h (0 mph) or vehicle running at 4th or 5th gear | Vehicle speed: more than 50km/h (31 mph) |
| 3 | 4th |
|
Vehicle speed: more than 50 km/h (31 mph) |