Torque Specification

COMPONENT TIGHTENING TORQUE SPECIFICATIONS (2JZ-GE)

Part tightened		N.m	kgf.cm	ft.lbf
Transmission output flange x Output shaft		126	1,280	92
Vehicle speed sensor set bolt		5.4	55	48 in.lbf
O/D direct clutch speed sensor set bolt		5.4	55	48 in.lbf
Solenoid connector set bolt		5.4	55	48 in.lbf
Solenoid wiring clamp set bolt		6.4	65	56 in.lbf
Oil strainer x Valve body		9.8	100	7
Oil pan x Transmission case		7.4	75	65 in.lbf
Drain plug		20	205	15
Park/neutral position switch x Transmission case		13	130	9
Park/neutral position switch set nut		6.9	70	61 in.lbf
Shift lever assembly x Body		8.3	85	74 in.lbf
Control shaft x Control lever		19	194	14
Shift lock control unit assembly x Shift lever plate		2.0	20	17 in.lbf
Shift lever housing set bolt and nut		3.9	40	35 in.lbf
Linear solenoid valve SLU, SLT x Valve body		6.4	65	56 in.lbf
Linear solenoid valve SLN x Valve body		10	100	7
Shift solenoid valve No. 1, No. 3 x Valve body		6.4	65	56 in.lbf
Shift solenoid valve No. 2, No. 4 x Valve body		10	100	7
Valve body x Transmission case		10	100	7
Parking lock pawl bracket x Transmission case		7.4	75	65 in.lbf
Heated oxygen sensor x Exhaust pipe		44	450	32
Pipe support bracket x Transmission		44	450	33
Front floor center brace x Body		7.4	75	65 in.lbf
Engine x Exhaust manifold		39	400	29
Heat insulator x Body		5.4	55	48 in.lbf
Center exhaust pipe x Tail pipe		44	450	33
Shift control rod x Shift lever assembly		13	130	9
Oil cooler pipe union nut		44	450	32
Oil cooler pipe clamp set bolt		5.4	55	48 in.lbf
Torque converter clutch x Drive plate		48	490	35
Engine rear mounting x Body		26	270	20
Starter x Transmission		37	380	27
Transmission x Engine	17 mm head	72	730	53
Transmission x Engine	14 mm head	37	380	27
Drive plate x Crankshaft		83	850	61