LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2003 >> GS 430 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System (3UZ-FE) >> Crankshaft Position Sensor >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Replacement

  1. REMOVE ENGINE UNDER COVER
  2. REMOVE CRANKSHAFT POSITION SENSOR
    Fig 1: Removing Crankshaft Position Sensor
    G00855886Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the crankshaft position sensor connector.
    2. Remove the bolt and crankshaft position sensor
  3. REINSTALL NEW CRANKSHAFT POSITION SENSOR
    1. Install a new crankshaft position sensor with the bolt.

      Torque: 6.5 N-m (65 kgf-cm, 58 in.-lbf) 

    2. Connect the crankshaft position sensor connector.
  4. REINSTALL ENGINE UNDER COVER
scientia non olet · About LEMON Manuals