Torque Specification
SFI TIGHTENING TORQUE SPECIFICATIONS (3UZ-FE)
| Part tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Fuel inlet hose (Rear fuel pipe) x Fuel main tube | for use with SST | 32 | 330 | 24 |
| Fuel tank vent tube set plate x Fuel tank | 3.5 | 36 | 31 in.lbf | |
| Delivery pipe x Lower intake manifold | 18 | 185 | 13 | |
| Fuel pressure pulsation damper x Delivery pipe | for use with SST | 33 39 |
340 400 |
24 29 |
| Fuel sender gauge x Fuel tank | 1.5 | 15 | 13 in.lbf | |
| Fuel tank x Body | 39 | 400 | 29 | |
| Water bypass pipe x Throttle body | 5.4 | 55 | 48 in.lbf | |
| Throttle body x Upper intake manifold, Lower intake manifold | 18 | 185 | 13 | |
| Camshaft oil control valve x Camshaft bearing cap | 7.5 | 80 | 66 in.lbf | |
| Intake air control valve x Upper intake manifold | 8.5 | 85 | 75 in.lbf | |
| Intake air control valve actuator x Upper intake manifold | 8.5 | 85 | 75 in.lbf | |
| Vacuum tank for ACIS x Lower intake manifold | 18 | 185 | 13 | |
| ECT sensor x Front water bypass joint | 19.6 | 200 | 14 | |
| Knock sensor x Cylinder block | 45 | 450 | 33 | |
| Heated oxygen sensor x Exhaust manifold, Front exhaust pipe | 44 | 450 | 32 | |
| VVT sensor x Cylinder head | 6.5 | 65 | 58 in.lbf | |