Shift Lock System: Inspection

INSPECT SHIFT LOCK CONTROL ECU
Using a voltmeter, measure the voltage at each terminal

HINT:

Do not disconnect ECU connector.

Fig 1: Identifying Connector Terminal
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Terminal Chart
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT KEY INTERLOCK SOLENOID
1. Disconnect the solenoid connector.
2. Using an ohmmeter, measure the resistance between terminals 3 and 4.
  Standard resistance: 12-17 Ω
  
  If the resistance value is not as specified, replace the solenoid.
  
  Fig 3: Measuring Resistance Between Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Touch the solenoid with your finger and check that the solenoid operation can be felt when battery voltage is applied intermittently to terminals 3 and 4.
  If the operation is not as specified, replace the solenoid.
  
  Fig 4: Checking Solenoid Operation
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002