Power Window Control System - Diagnosis
- How To Proceed With Troubleshooting
- Customer Problem Analysis Check
- Pre-Check
- 1. Check Window Lock Switch
- 2. Check Manual Up/Down Function
- 3. Check Auto Up/Down Function
- 4. Check Remote Manual Up/Down Function
- 5. Check Remote Auto Up/Down Function
- 6. Check Manual Up/Down Function Via Driver Side Door Lock Key CYLIND
- 7. Check Manual Down Function Via Transmitter
- 8. Check Power Window Operation Function After Ignition Off
- 9. Check Jam Protection
- 10. Check Power Window Fail-Safe Function
- 11. Check Switch Condition With Hand-Held Tester
- 12. Check Data List With Hand-Held Tester
- 13. Check Active Test With Hand-Held Tester
- Customize Parameters
- Diagnostic Trouble Code Chart
- Location
- Problem Symptoms Table
- DTC B1221 Power Window Switch Circuit On Driver Door
- DTC B1231 Jam Protection Limit Switch Circuit On Driver Door, DTC B1232 Jam Protection Pulse Switch Circuit On Driver Door
- Auto Up/Down Function Does Not Operate At Driver Side
- Auto Up/Down Function Does Not Operate At Passenger Side
- Auto Up/Down Function Does Not Operate At Rear LH
- Auto Up/Down Function Does Not Operate At Rear RH
- Manual Up/Down Function Does Not Operate At Driver Side
- Manual Up/Down Function Does Not Operate At Passenger Side
- Manual Up/Down Function Does Not Operate At Rear LH
- Manual Up/Down Function Does Not Operate At Rear RH
- Remote Up/Down Function Does Not Operate