LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2003 >> IS 300 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Component Tests >> Power Window Motor PTC Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Motor PTC Operation

  1. Disconnect the connector from the master switch.
  2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2 on the wiring harness side connector and raise the window to fully closed position. See CONNECTOR IDENTIFICATION .
  3. Continue to apply voltage, check that there is a PTC operation noise within approximately 4-90 seconds.
  4. Reverse the polarity and check that the window begins to descend within approximately 60 seconds.
  5. If operation is not as specified, replace the motor. See POWER WINDOW REGULATOR MOTOR (FRONT)  or POWER WINDOW REGULATOR MOTOR (REAR)  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals