Torque Specification
TIGHTENING TORQUE SPECIFICATION
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Bearing retainer x Drive end frame | 3.0 | 31 | 27 in.lbf |
| Generator pulley x Rotor | 110.5 | 1,125 | 82 |
| Rectifier holder x Lead wire on rectifier end frame, Rectifier holder | 2.94 | 30 | 26 in.lbf |
| Rectifier end frame x Drive end frame w/ Cord clip w/o Cord clip |
5.4 4.5 |
55 46 |
48 in.lbf 40 in.lbf |
| Voltage regulator x Rectifier end frame, Rectifier holder | 2.0 | 20 | 18 in.lbf |
| Brush holder x Rectifier holder, Voltage regulator | 2.0 | 20 | 18 in.lbf |
| Rear end cover x Rectifier end frame | 4.4 | 45 | 39 in.lbf |
| Plate terminal x Rectifier holder, Rectifier end frame | 3.8 | 39 | 34 in.lbf |
| Terminal insulator x Rectifier holder | 6.5 | 66 | 58 in.lbf |
| Generator x Cylinder block | 39 | 400 | 29 |