Torque Specification

TIGHTENING TORQUE SPECIFICATION

Part tightened	N.m	kgf.cm	ft.lbf
Terminal 30 nut, Terminal C nut x Terminal bolt	17	173	13
End cover x Magnetic switch housing	3.6	37	32 in.lbf
End cover x Brush holder	3.8	39	34 in.lbf
Starter housing x Magnetic switch	9.3	95	82 in.lbf
End cover with field frame x Starter housing	9.3	95	82 in.lbf
Lead wire of field coil x Terminal C	5.9	60	52 in.lbf
Starter x Cylinder block	37	380	27
Starter cable x Starter	9.8	100	87 in.lbf
Throttle body x Upper intake manifold, Lower intake manifold	18	185	13