DTC P0110, DTC P0112 Or DTC P0113: Notes
Code Definitions
- P0110: Intake Air Temperature Circuit
- P0112: Intake Air Temperature Circuit Low Input
- P0113: Intake Air Temperature Circuit High Input
NOTE:
For information on engine immobilizer system, see COMPUTERIZED ENGINE CONTROLS
in THEORY & OPERATION article.
CAUTION:
If ECM replacement is instructed in following testing, always ensure ECM harness connector and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. If ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - LEXUS
article.