Fail-Safe Mode Chart
WARNING: This page is about a different car, the 2003 Toyota Matrix and 2003 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
If any of following codes are recorded, engine control module (ECM) enters fail-safe mode. See IDENTIFYING FAIL-SAFE MODE CHART table.
IDENTIFYING FAIL-SAFE MODE CHART
| DTC No. | Fail-Safe Operation | Fail-Safe Deactivation Conditions |
|---|---|---|
| P0100 | Ignition Timing Fixed At 10° BTDC | Returned To Normal Condition |
| P0110 | Intake Air Temperature Fixed At 68°F (20°C) | Returned To Normal Condition |
| P0115 | Engine Coolant Temperature Fixed At 176°F (80°C) | Returned To Normal Condition |
| P0120 | VTA Fixed At 0° | Following Condition Is Repeated At Least 2 Times Consecutively When Closed Throttle Position Switch Is OFF: VTA Is Greater Than Or Equal To 0.1 V & Less Than Or Equal To 0.95 V |
| P0135 & P0141 | Abnormal Heater Circuit Is Turned Off | Ignition Switch OFF |
| P0325 | Max. Timing Retardation | Ignition Switch OFF |
| P1300, P1305, P1310 & P1315 | Fuel Cut | Returned To Normal Condition |
| P1656 | It Cut Electrically Abnormal Circuit | Returned To Normal Condition |