LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2003 >> LS 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Engine Immobilizer Systems) >> Programming >> Erasing Ignition Key Identification Codes >> Using Brake Pedal & Accelerator Pedal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Brake Pedal & Accelerator Pedal

WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert registered master key in ignition lock cylinder. Within 15 seconds of inserting master key into ignition lock cylinder, depress and release accelerator pedal 6 times.
  2. Within 20 seconds of depressing and releasing accelerator pedal 6 times, depress and release brake pedal 7 times.
  3. Within 10 seconds of depressing and releasing brake pedal 7 times, remove master key from ignition lock cylinder. Leave vehicle for more than 20 seconds without performing any operation. Procedure should now be complete and transponder key code should now be erased. If master key cannot be removed from ignition lock cylinder within 30 seconds from the first brake depression in step  2, the transponder key code erasure is cancelled.
scientia non olet · About LEMON Manuals