Using Toyota Hand-Held Tester
WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- Connect hand-held tester to data link connector No. 3. See Figure. When using hand-held tester, more detailed procedures may be displayed on tester while performing this procedure.
- Insert registered master key in ignition lock cylinder. Turn ignition on. Select SUB-KEY REGISTRATION on hand-held tester. Within 20 seconds, remove master key from ignition lock cylinder.
- Within 10 seconds of removing master key from ignition lock cylinder, insert sub-key to be registered in ignition lock cylinder. Ensure SECURITY indicator light flashes. SECURITY indicator light is located just above the fuel gauge on the instrument cluster.
- After one minute, additional sub-key should be registered and SECURITY indicator light should then turn off. The registration mode is complete after removing sub-key from ignition lock cylinder within 10 seconds and brake pedal is depressed, or SECURITY indicator light has turned off for at least 10 seconds.