Jam Protection Pulse Switch (Rear)

WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Sensor may be damaged if wiring harness is connected incorrectly.

Connect the positive (+) lead from the TOYOTA electrical tester to terminal No. 7 and the negative (-) lead to terminal No. 6. See CONNECTOR IDENTIFICATION .
Connect the positive (+) lead from the battery to terminal No. 3 and the negative (-) lead to terminal No. 1.
Check that a pulse is generated while the motor is running.
Reverse the polarity and check that a pulse is generated. If operation is not as specified, replace the motor. See WINDOW REGULATOR (REAR DOOR) under REMOVAL & INSTALLATION.