Inspection Procedure
WARNING: This page is about a different car, the 2002 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- Check automatic light control sensor
. See
INSPECT AUTOMATIC LIGHT CONTROL
.
- NG : Replace automatic light control sensor.
- OK : Go to step 2.
- Check harness and connector between automatic light control sensor and body ECU
. See
HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS
.
- NG : Repair or replace wire harness or connector.
- OK : Go to step 3.
- Does the system operate normally after replacement of automatic light control sensor.
- Yes : Replace automatic light control sensor.
- NO : Proceed to next circuit inspection shown in problem symptoms. See PROBLEM SYMPTOMS .