Inspection Procedure
WARNING: This page is about a different car, the 2003 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
- Display Check Mode (Touch Switch Check)
- Perform display touch switch check of display check mode.
- Start up the diagnosis system and perform display touch switch check of display check mode.
Standard: Touch switch is normal
- NG: Check And Replace Radio Receiver Assembly
- OK: Go To Next Step
- Perform display touch switch check of display check mode.
- Check Switch (Beep Sound)
- Check the switch (Beep sound).
- Press each touch switch on the navigation screen to check that the beep sounds are produced.
Standard: Beep sound is normal
- NG: Repair Or Replace Harness Or Connector
- OK: Check And Replace Navigation ECU
- Check the switch (Beep sound).