Steering Pad Switch LH: Replacement
WARNING: This page is about a different car, the 2004 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
COMPONENTS: See COMPONENTS
- SEPARATE BATTERY NEGATIVE TERMINAL (See AIR BAG SAFETY PRECAUTIONS )
- REMOVE STEERING WHEEL COVER LOWER NO.2
- REMOVE STEERING WHEEL COVER LOWER NO.3
- REMOVE HORN BUTTON ASSY
- REMOVE STEERING PAD SWITCH LH
- Disconnect the connector.
- Disconnect the connector of cruise control main switch.
- Remove the screw.
- Disengage the meshing of 2 pins and remove the steering pad switch LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL HORN BUTTON ASSY
- INSPECT HORN BUTTON ASSY
- INSPECT SRS WARNING LIGHT