LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2003 >> LS 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 637 (Ignition) >> Crankshaft Position Sensor >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Replacement

WARNING: This page is about a different car, the 2004 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ENGINE UNDER COVER NO.1 
  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
      Fig 1: Identifying Crankshaft Position Sensor
      G01051906Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Install a new sensor with the bolt.

      Torque: 6.5 N.m (65 kgf.cm, 58 in. lbf) 

    2. Connect the sensor connector.
  4. INSTALL ENGINE UNDER COVER NO.1 
scientia non olet · About LEMON Manuals