Service Data
WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE DATA - DRIVE SHAFT, PROPELLER SHAFT, AXLE
| PROPELLER SHAFT ASSY FRONT | ||
|---|---|---|
| Propeller shaft runout | Maximum: | 0.3 mm (0.012 in.) |
| Universal joint spider bearing axial play | Maximum: | 0 mm (0 in.) |
| PROPELLER SHAFT ASSY | ||
| Propeller shaft runout | Maximum: | 0.3 mm (0,012 in.) |
| FRONT AXLE HUB SUB-ASSY | ||
| Front axle hub backlash | Maximum: | 0.05 mm (0.0020 in.) |
| Front axle hub deviation | Maximum: | 0.05 mm (0.0020 in.) |
| REAR AXLE SHAFT LH | ||
| Rear axle shaft backlash | Maximum: | 0.05 mm (0.0020 in.) |
| Rear axle shaft deviation | Maximum: | 0.05 mm (0.0020 in.) |
| Rear axle shaft runout | Maximum: | 1.5 mm (0.0591 in.) |
| Rear axle shaft flange runout | Maximum: | 0.05 mm (0.0020 in.) |