Torque Specification
WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
POWER STEERING VANE PUMP
TORQUE SPECIFICATION POWER STEERING VANE PUMP
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| POWER STEERING VANE PUMP | |||
| Vane pump housing rear x Vane pump housing front | 24 | 240 | 17 |
| Pressure port union | 83 | 850 | 61 |
| Suction port union set bolt | 13 | 130 | 9 |
| Vane pump assy x Vane pump bracket rear | 43 | 438 | 32 |
| Vane pump assy x Stud bolt | 22 | 224 | 16 |
| Vane pump pulley set nut | 44 | 449 | 32 |
| Pressure feed tube assy x Vane pump assy | 51 | 520 | 38 |
| Pressure feed tube assy clamp set bolt | 7.8 | 80 | 69 in.lbf |
STEERING LINK ASPOWERSY
TORQUE SPECIFICATION STEERING LINK ASPOWERSY
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Control valve housing set bolt | 18 | 184 | 13 |
| Bering guide nut | 25 | 250 | 18 |
| Rack guide spring cap | 25 | 250 | 18 |
| Rack guide spring cap lock nut | 69 (65) | 700 (660) | 51 (48) |
| Power steering rack x Rack end | 103 (98) | 1,050 (1,000) | 76 (72) |
| Tie rod assy lock nut | 88 | 897 | 65 |
| Turn pressure tube union nut | 25 (23) | 250 (230) | 18 (17) |
| Power steering link assy set bolt and nut | 100 | 1,020 | 74 |
| Pressure feed and return tubes x Control valve housing | 44 (42) | 449 (428) | 32 (31) |
| Pressure feed tube clamp set bolt | 28 | 286 | 21 |
| Outlet return tube | 44 (42) | 449 (428) | 32 (31) |
| Tie rod end x steering knuckle | 91 | 928 | 67 |
| Stabilizer bar front bracket set bolt | 40 | 408 | 30 |
(): For use without SST