How To Proceed With Troubleshooting

WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Troubleshoot in accordance with the procedures in the following examples.

VEHICLE BROUGHT TO WORKSHOP
Go to next step.
CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK (See CUSTOMER PROBLEM ANALYSIS CHECK )
Go to next step.
PROBLEM SYMPTOMS TABLE
Go to next step.
PERFORM TROUBLESHOOTING
1. PRE-CHECK
2. Circuit inspection (See AUTO UP/DOWN FUNCTION DOES NOT OPERATE - POWER WINDOWS DO NOT OPERATE AT ALL )
Go to next step.
ADJUST, REPAIR OR REPLACE
Go to next step.
RESET POWER WINDOW MOTOR
1. If any of the power window switch illuminations is blinking after repair, reset the power window.
  1. Turn the ignition switch ON.
  2. Open the driver side door glass.
  3. Fully pull up the AUTO switch of the power window master switch until the door glass is fully closed.
  4. Check that the AUTO UP/DOWN function operates normally.
Go to next step.

END