Multi-Display (CRT Display) Display: Replacement

HINT:

COMPONENTS: See COMPONENTS 

1. REMOVE AIR CONDITIONER CONTROL ASSY (See  REPLACEMENT  ) 
2. REMOVE INSTRUMENT PANEL SAFETY PAD GARNISH SUB-ASSY (W/ LEXUS NAVIGATION SYSTEM) (See  REPLACEMENT  ) 
3. REMOVE INSTRUMENT PANEL GARNISH SUB-ASSY NO. 2 (W/ LEXUS NAVIGATION SYSTEM) (See  REPLACEMENT  ) 
4. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY CENTER (W/ LEXUS NAVIGATION SYSTEM) 
   1. Remove the 2 bolts and 2 screws.
   2. Disconnect the connector, then remove the multi-display (CRT DISPLAY ) display and instrument cluster finish panel sub-assy center and clip.
   Fig 1: Removing Bolts And Screws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. REMOVE MULTI-DISPLAY (CRT DISPLAY) DISPLAY 
   1. Remove the 4 screws and instrument panel finish UPR panel.
   2. Remove the 6 screws and instrument panel finish panel No. 1 retainer.
   3. Remove the 5 screws and instrument panel finish panel No. 2 retainer.
   4. Remove the instrument cluster finish CTR LWR panel.
      Fig 2: Removing Instrument Panel Finish Panel

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   5. Remove the 2 screws.
      Fig 3: Removing Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   6. Remove the 2 screws and wiring harness clamp.
   7. Disconnect the 4 connectors, then remove the clamp.
   8. Remove the multi-display (CRT DISPLAY) display.
   Fig 4: Removing Connectors

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002