Power Mirror Control System - Diagnosis: Pre-Check
- INSPECT DRIVER SIDE J/B
- Using hand-held tester, check the driver side J/B condition on the data monitor.
Standard:
SPECIFIED CONDITION CHARTItem Condition Specified condition OUTER MIRROR FOIL SW OFF --> Retract ON --> OFF OUTER MIRROR RETURN SW OFF --> Reinstate ON --> OFF MIRRSELSWL Right/Left adjustment switch in neutral --> LEFT ON --> OFF MIRRSELSWR Right/Left adjustment switch in neutral --> RIGHT ON --> OFF MIRR POS SW L Mirror switch in neutral --> LEFT ON --> OFF MIRR POS SW R Mirror switch in neutral --> RIGHT ON --> OFF MIRR POS SW UP Mirror switch in neutral --> UP ON --> OFF MIRR POS SW DWN Mirror switch in neutral --> DOWN ON --> OFF
- Using hand-held tester, check the driver side J/B condition on the data monitor.
- INSPECT DRIVER SEAT ECU AND PASSENGER SEAT ECU
- Using hand-held tester, check the condition of the driver seat ECU and passenger seat ECU on the data monitor.
Standard:
SPECIFIED CONDITION CHARTItem Condition Specified condition D-MIRR MEN 1 Memorized in 1 MEN/NOT MEN D-MIRR MEN 2 Memorized in 2 MEN/NOT MEN P-MIRR MEN 1 Memorized in 1 MEN/NOT MEN P-MIRR MEN 2 Memorized in 2 MEN/NOT MEN D-MIRR MEN POS 1 Memorized in 1 0-5000 D-MIRR MEN POS 2 Memorized in 2 0-5000 P-MIRR MEN POS 1 Memorized in 1 0-5000 P-MIRR MEN POS 2 Memorized in 2 0-5000 PNPSW Shifted in P range ON/OFF NSW Shifted in N range ON/OFF VEHICLE SPD While driving 0 <--> 255 km/h
- Using hand-held tester, check the condition of the driver seat ECU and passenger seat ECU on the data monitor.
- PERFORM ACTIVE TEST (DOOR ECU)