Transmission Revolution Sensor: Replacement
WARNING: This page is about a different car, the 2004 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE TRANSMISSION REVOLUTION SENSOR (NC0 SENSOR)
- Disconnect the transmission revolution sensor connector.
- Remove the bolt and transmission revolution sensor.
- Remove the O-ring from the transmission revolution sensor.
- REMOVE TRANSMISSION REVOLUTION SENSOR (SP2 SENSOR)
- Disconnect the transmission revolution sensor connector.
- Remove the bolt and transmission revolution sensor.
- Remove the O-ring from the transmission revolution sensor.
- INSTALL TRANSMISSION REVOLUTION SENSOR (SP2 SENSOR)
- Coat a new O-ring with ATF and install it to the transmission revolution sensor.
- Install the transmission revolution sensor with the bolt.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
- Connect the transmission revolution sensor connector.
- INSTALL TRANSMISSION REVOLUTION SENSOR (NC0 SENSOR)
- Coat a new O-ring with ATF and install it to the transmission revolution sensor.
- Install the transmission revolution sensor with the bolt.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
- Connect the transmission revolution sensor connector.