Remove Speed Sensor

WARNING: This page is about a different car, the 2004 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the speed sensor connector.
Remove the resin clip and 4 clamp bolts holding the sensor harness from the steering knuckle and upper arm.
1. Torque: 13 N.m (130 kgf.cm, 9 ft.lbf)
Fig 1: Disconnecting Speed Sensor Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Remove the speed sensor installation bolt and speed sensor from the steering knuckle.
1. Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
Fig 2: Removing Speed Sensor Installation Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002