Setting Driving Position
WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
- Adjust the driver's seat and the outside rear view mirrors to the desired position.
- While pushing the SET button, push button 1 or 2 until the signal beeps.
- The beep sound means that the positions are recorded in the computer's memory.
- By repeating these 2 steps and pressing the remaining button, the driving position for another driver can be recorded.
- To set a new memorized position, select the desired position, and perform step 2). The previous memory will be erased and the new position will be set.
- To make only slight changes to an already memorized position, the easiest way is to first activate the memorized position, then make the desired changes and perform step 2) above.