Bleeding Brake System: Notes

WARNING: This page is about a different car, the 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Wash off brake fluid immediately if it comes into contact with a painted surface.

NOTE: If any work is done on brake system or if air in brake lines is suspected, bleed air from system. When bleeding, keep amount of fluid in reservoir between Min. and Max. Use only SAE J1703 or FMVSS No. 116 DOT 3 brake fluid.

NOTE: If master cylinder has been disassembled or reservoir becomes empty, bleed air from master cylinder. See MASTER CYLINDER .