Brake Line
WARNING: This page is about a different car, the 2002 Lexus LX 470 and 2001 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.
- Fill reservoir with brake fluid.
- Connect a vinyl tube to bleeder screw on brake caliper and place other end in a clear jar.
- Depress brake pedal several times, then loosen bleeder screw with pedal held down.
- When fluid stops coming out, tighten the bleeder screw to specification. See TORQUE SPECIFICATIONS .
- Release brake pedal. Repeat steps 3 and 4 until all air in fluid has been bled out.
- Repeat procedure to bleed air out of brake line for each wheel.