Torque Specifications
TORQUE SPECIFICATIONS
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| VANE PUMP ASSY | |||
| Vane pump housing sub-assy front at Vane pump bracket rear | 39 | 400 | 29 |
| Power steering solenoid valve assy at Vane pump housing sub-assy front | 51 | 520 | 38 |
| Suction port union set bolt | 13 | 130 | 9 |
| Air control valve assy at Vane pump housing sub-assy front | 29 | 300 | 22 |
| Vane pump pulley set nut | 43 | 440 | 32 |
| Vane pump assy set nut | 43 | 440 | 32 |
| Vane pump assy set bolt | 39 | 400 | 29 |
| Union bolt | 49 | 500 | 36 |
| RACK & PINION POWER STEERING GEAR ASSY | |||
| Cylinder end stopper at Power steering rack housing sub-assy | 59 | 600 | 43 |
| Bearing guide nut | 25 | 250 | 18 |
| Control valve housing at Power steering rack housing | 18 | 180 | 13 |
| Steering rack guide spring cap | 25 | 250 | 18 |
| Steering rack guide spring nut | 51 | 520 | 38 |
| Steering rack end sub-assy at Power steering rack | 76 | 770 | 56 |
| Tie rod assy lock nut | 56 | 570 | 41 |
| Steering left and right turn pressure tube at Power steering rack housing | 23 | 240 | 17 |
| Rack & pinion power steering gear assy set bolt | 65 | 660 | 48 |
| Tube clamp set bolt | 5.0 | 55 | 48 in..lbf |
| Pressure feed and return tube set union bolt | 49 | 500 | 36 |
| Tie rod assy at Lower ball joint | 87 | 890 | 64 |
| Front suspension member brace sub-assy RH | 58 | 590 | 43 |
| Front suspension member brace rear LH | 58 | 590 | 43 |
| Front suspension member brace rear RH | 58 | 590 | 43 |
( ): For use without SST