Torque Specification
STEERING SYSTEM TORQUE SPECIFICATION
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| STEERING COLUMN | |||
| Steering wheel pad set screw (Torx (r) screw) | 8.8 | 90 | 78 in..lbf |
| Steering wheel set nut | 50 | 510 | 37 |
| Intermediate shaft assembly x Control valve shaft | 35 | 360 | 26 |
| No. 2 intermediate shaft assembly x Intermediate shaft assembly | 35 | 360 | 26 |
| Column assembly set nut | 25 | 260 | 19 |
| No. 2 intermediate shaft assembly x Main shaft | 35 | 360 | 26 |
| Column tube support set bolt | 20 | 200 | 15 |
| Tilt slider assembly set bolt | 23 | 230 | 17 |
| POWER STEERING VANE PUMP | |||
| 2JZ-GE Engine: | |||
| Union bolt | 49 | 500 | 36 |
| Pump assembly set bolt | 58 | 590 | 43 |
| Vane pump pulley set nut | 43 | 440 | 32 |
| Front housing x Rear housing | 24 | 240 | 17 |
| Oil reservoir set bolt Front | 13 | 130 | 9 |
| Rear | 24 | 240 | 17 |
| Solenoid valve x Front housing | 51 (69) | 520 (700) | 38(51) |
| 3UZ-FE Engine: | |||
| Union bolt | 49 | 500 | 36 |
| Pump assembly set bolt | 39 | 400 | 29 |
| Pump assembly set nut | 43 | 440 | 32 |
| Vane pump pulley set nut | 43 | 440 | 32 |
| Front housing x Rear bracket | 39 | 400 | 29 |
| Suction port union set bolt | 13 | 130 | 9 |
| Air control valve | 29 | 300 | 22 |
| Solenoid valve x Front housing | 51 (69) | 520 (700) | 38(51) |
| POWER STEERING GEAR | |||
| Intermediate shaft assembly x Control valve shaft | 35 | 360 | 26 |
| Pressure feed and return tube set union bolt | 49 | 500 | 36 |
| PS gear assembly set bolt | 65 | 660 | 48 |
| Tube clamp set bolt | 5.0 | 55 | 48 in..lbf |
| Turn pressure tube | 23 (25) | 240 (250) | 17(18) |
| Tie rod end Lock nut | 56 | 570 | 41 |
| Rack end x Steering rack | 76(103) | 770(1, 050) | 56 (76) |
| Rack guide spring cap lock nut | 51 (69) | 520 (700) | 38(51) |
| Control valve assembly set bolt | 18 | 180 | 13 |
| Bearing guide nut | 25 | 250 | 18 |
| Cylinder end stopper | 59 | 600 | 43 |