Ignition Switch/Steering Lock: Replacement

HINT:

The installation is in the reverse order of the removal. However, when there is a special point concerning the installation, it is indicated.

1. REMOVE STEERING COLUMN COVER LWR (SEE  OVERHAUL  ) 
2. REMOVE STEERING COLUMN COVER UPR (SEE  OVERHAUL  ) 
3. REMOVE IGNITION OR STARTER SWITCH ASSY 
   1. Disconnect the ignition switch connector and unlock warning switch connector.
   2. Remove the clamp.
   3. Remove the 2 screws and ignition switch assy.
      Fig 1: Removing Ignition Or Starter Switch Assy

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002