Typical Enabling Condition
All:
TYPICAL ENABLING CONDITION - ALL
| The monitor will run whenever these DTCs are not present | See LIST OF DISABLE A MONITOR |
Case 1:
TYPICAL ENABLING CONDITION - CASE 1
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
Case 2:
TYPICAL ENABLING CONDITION - CASE 2
| Either of following conditions is met | Condition 1 or 2 |
| 1. Air pump | Not operating |
| 2. Air switching valve | Not operating |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
Case 3:
TYPICAL ENABLING CONDITION - CASE 3
| Air pump | Operating |
| Air switching valve | Operating |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
Case 4:
TYPICAL ENABLING CONDITION - CASE 4
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |